LUMIX GX80 / GX85 camera cage (work in progress)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
camera cage with bunch of 1/4" and 3/8" threads and a rosette for attaching the handle
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 206
- Makes
- 1
- Views
- 2,214
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Camera cage for the Lumix GX80 / GX85 camera. I designed the cage because the cages for GX80, which is still a good camera, are no longer available on the market.
The cage contains a number of 1/4" and 3/8" UNC camera threads, known as cheeseplate, which allow a number of different accessories to be attached to the camera. Threads have a standard pitch of 9 mm (center to center).
The left side contains a rosette with a 1/4" thread in the center for attaching a handle.
This model is a work in progress, nevertheless I decided to publish it. After a short test, I found out that some threads are unnecessary or unusable due to impractical placement or they are too shallow.
In the next updates, I will try to eliminate these errors and incorporate corrections and adjustments according to my impressions from testing. However, I'll welcome your suggestions and improvements in the comments.
Print settings:
Printed with Prusament Mystic Green PLA on Prusa Mini. 0,1mm layer height, 3 perimeters and 20% infill. The cage is pretty solid and does not flex.
Supports: are necesseray under overhangs. I did not use the supports in threads which resulted in their slightly reduced quality but it does not have impact on their functionality. However, I recommend supports everywhere