Raspberry Pi Zero(ver1.3) Case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.25 – €1.52 net (excluding VAT)
For file: Pi Zero Case / pizero_case_2_zero_base_a_02mm_petg_mk3s_1h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.39 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.5 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the Case for the Raspberry Pi Zero ver1.3 Zero_Base_A is normal type Under Case.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 428
- Makes
- 1
- Views
- 1,877
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the Case for the Raspberry Pi Zero ver1.3
Zero_Base_A is normal type Under Case.
Zero_Base_B cover is Under Case with screw hole.
Zero_Top_Basic is Top Case with I/O slot.
Zero_Top_withCPUHole is Top Case with I/O slot and CPU fan hole.
Zero_Top_NoIOSlot is Top Case without I/O slot.
Zero_IO_Cover is the I/O slot cover.
See this site for more information.
Sorry, This site is Japanese only.
(https://kitto-yakudatsu.com/archives/1591)
Print instructions
Category: Computer Print Settings
Printer: DeAGOSTINI idbox!
Rafts: No
Supports: Yes
Resolution: 0.15mm
Infill: 50%
Notes:
Verbatim PLA White