1 / 17
Prusa mk3 Y axis Adjustable Belt Tensioner and BED Holder with Paralelism and compatible with other Mods — image 1
1 / 17

Prusa mk3 Y axis Adjustable Belt Tensioner and BED Holder with Paralelism and compatible with other Mods

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix from the Thingiverse 2019 version with a lot of upgrades. I Think this mod is the best Belt-Tensioner..

Rating
4.864 / 5
Likes
179
Downloads
747
Makes
22
Views
5,007
Reviews
22

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This version is a remix from the 2019 original from Thingiverse.
https://www.thingiverse.com/thing:2786671/files

I made an effort to upgrade and remix it  cause I Think this is easy,  and far away,  the best Y-Tensioner Mod  for prusa.   Only one bolt to adjust tension. 

See the Complete Install Guide below this info!!!!  Dont miss it !!!


Compatible With:
__________________________________

  • Prusa Mk3 
  • Prusa Mk3s 
  • Prusa Mk3s+   
  • Other Printers


Upgrades:
__________________________________ 

  • Hex holes are tight,  hex nuts dont fall off when you are installing the mod.
  • LockNuts dont turn inside the hole when you are aplying tension. 
  • Block-TNuts and M3 Hex Heads are HIDDEN inside the frame  (for better looking)
  • New Y_Holder with improved Height and door to assure the Gt2 belt
  • Alternative Y_Holder  from Jackass Filament (https://www.printables.com/model/205812-prusa-mk3-y-belt-holder-improved-for-gates-belts/files)
  • Y-Holder has 48mm width  (for compatibility with Mk3S Y-Motor Mount ultra and other mods)
  • Mk3 Y Belt Holder inside collection for alternative Y-Holder  (print the one you most like)
     

Original Features:
__________________________________ 

  • The mod has paralelism across all the belt.
  • Is easy to print and install
  • Can be used with other mods  
  • Original GT2 Belt can be used


Hardware Needed:
__________________________________ 

  • 2 M3x35mm socket head cap screws (for idler_Frame and Mount)
  • 1 M3x30mm socket head cap screws (for tensioner)
  • 2 M3x10mm for Y_Holder 
  • 5 M3 Nylock nut (For idler_Frame and Mount)
  • Your Pulley


What files to print?
__________________________________ 

  • 1x Base Holder
  • 1x Base_for_your_pulley  (GT2, GT16, Prusa Version, etc)
  • 1x Y Holder  (this version or another)
     

Compatible Mods
__________________________________ 

_________________________________________________________________________________

INSTALL MANUAL
_________________________________________________________________________________

 1º - Prepare the Base_Holder




2º - Insert the LockNuts into the Hex Holes.  Dont worry if you cant,  its thight.  Use the Pull method from the Prusa manual  and screw them :)


 



3º - Get the “Base_for_your_pulley”  (I choose the Prusa one)




4º - Put It in the Base_Holder.  Later will be screwed




5º - As you can see ,  the Base_of_Your_pulley  has two sides.   One with Hex Holes,  One with Round holes.  




6º - Prepare your Pulley,  two M3x35 and Two LockNuts 




7º - Put the LockNuts in the Hex holes!  Now , from the other side, Insert the M3 across the BaseHolder + Base_of_Your_pulley + Your Pulley.
Screw a little ,  dont be rude.  The Y base needs to move freely,  and your pulley too!!!



8º - Now Prepare a m3x30 and another Locknut.   Put it in the hex hole.   Screw from behind.




9º - You will end with something like this!




10º - Time to pass the Belt across our Tensioner. 




11º - Now pass the belt into the Bed-Holder Too,  as shown in this image.  Is easy in this step. 




12º - Pass the rest of the gt2-belt across the motor and put it into the Bed Holder.  You can now use 2x m3x10 bolts to screw the Bed-Holder to the Bed..

Optionally,  you can put the Bed-Holder-Door to assure your GT2 BELT with 2 M3x18 and two hexnut or locknut.




13º - You will end with a tensioner like this one. Only one bolt to add or rest tension to the Y-Axis.  You can do it from the FRONT of the printer,  even if the LCD screen is in his place :)

ENJOY!

Tags