Bellini Cipriani Bottle Cap
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.48 – €0.59 net (excluding VAT)
For file: Bellini Cipriani Bottle Cap_0.2mm_PLA_MK3S_34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.54 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 34.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple bottle cap for this nice Bellini bottle you can find in Europe
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
My wife liked the Bellini Cipriani bottle design, we noticed you can easily remove the labels and leave it clean in this teal like color so we can use it as a water jar.
So I designed this quick cap for the bottle so it looks better.
I got best results when printing with “Detect thin walls”. Takes around 35 minutes to print with PLA in 0.20 Speed profile and 20% infill. I also like to keep the seam in the rear. Tried printing it in vase mode, but its too fragile so not worth it.
Feel free to tinker the design as you need.
Rememeber, your like is also welcomed 😉