Height Gauges
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.37 – €4.12 net (excluding VAT)
For file: ride-height-gauge_02mm_petg_mk3s_3h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.75 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 3.71 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Height gauges in 1/4" increments. Standard file measures heights from 1/4" to 2 1/2".
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 131
- Makes
- 0
- Views
- 1,984
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Height gauges in 1/4" increments. Standard file measures heights from 1/4" to 2 1/2". The intermediate file measures from 3/8" to 2 5/8". Can be used to measure heights underneath things that are hard to measure with a tape or calipers. I use these as gauges to set the ride heights on Quarter MIdget race cars.
Print instructions
PETG
Change colors at top and bottom layers so text is legible from both sides. The text on the bottom (print bed side) is recessed. The text on the upward side protrudes.