Catcher for a marble run
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A catcher with seperated plate and catcher, so the Plate can be turned in…
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 266
- Makes
- 10
- Views
- 1,114
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
A catcher with seperated plate and catcher, so the Plate can be turned in all 6 directions.
The Catcher was printed upside-down.
The open side, where the marble goes in, was placed on the bed.
The ring is printed separately (upside down) and glued into the plate bottom.
Update 24.11.2019:
The upper part of the catcher tend to tip out of the plate, when the marbles hit the back wall of the catcher.
Therfore the plate got a groove around all 6 sides, and the catcher got a bulge at the side where the marbles goes in.
The bulge of the catcher fit into the groove of the plate and the catcher doesn't tip over so easily
The second version of the catcher is a test for easier printing.
Update 29.12.19:
Upload of a second, stronger ring. Print Settings ==============
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0,1
Filament:
Enotepad PLA
wood
Category: Toys & Games