1 / 1
Rasbperry Pi + PoE Hat + HDMI Adapter Frame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Frame for stabilizing / mounting all three parts together.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
Used to mount all PCBs together and allow for an upright position.
- Raspberry Pi 3B+
- Raspberry Pi PoE Hat
- CSI-to-HDMI Adapter
Modifications needed:
- Drill out holes of CSI Adapter to 2.5mm
Mounting Hardware needed:
- 4x M2.5x10 (Bottom 4 screws)
- 4x M2.5x12 (3x Top Screw, extra Screw for CSI adapter)
- 1x M2.5x16 (CSI Adapter into midframe)
All models have a single flat printing surface, no supports necessary.
My print settings used were:
- 0.6mm nozzle
- 0.3mm Quality Preset
- No Top/Bottom solid layers
- Infill 50% Grid