1 / 10
Stream Deck mk.1 Holder/Bracket/Mount for 32mm diameter poles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You need: ・4x (M3x30 screws) ・4x (M3 nuts) ・Superglue
- Rating
- 5 / 5
- Likes
- 80
- Downloads
- 378
- Makes
- 2
- Views
- 3,326
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The Parts are split into bodies which allows for easier printing without support.
Parts are labeled A,B and C which are meant to be glued together. Be careful to glue them in the correct orientation.
There is a Fusion 360 file attached so in case if you want to make your own bracket it shouldn't be too hard to modify the model.
The small cable claw is optional. You can print it out and glue on the arm or base for better cable management.