Shot Glass Display Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modular system to help you display your shot glasses!
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 104
- Makes
- 0
- Views
- 1,451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a modular system to help you display your shot glasses! There are various diameter stands you can mix and match to help hold the glasses more securely. Each glasses stand is printed individually and then snaps together with connectors.
Stands
There are a few different options, the 1-43_tall nomenclature means 1.43 inches in diameter and its one of the tall ones. I recommend measuring the bottom of the glass with calipers and choosing a stand with a diameter slightly bigger.
Connectors
The connectors connect each one of the individual glass stands together. The system is designed to have one row of short stand in the front and one row of tall stands in the back.
The “connector-row” file is used to connect the stands in each row together. For example, it connects one short stand to another short stand. It also connects the tall stands together.
the “connector-column” file is a connector that connects the front row to the back row.
Caps
The caps are designed to fill unused connector holes. There are a couple different types:
“cap-corner” cap off the corners of the tall glass stands.
“cap-large” caps off the connector hole on the front of the tall glass stands (fills connector-column holes).
“cap-small” caps off the holes left by “connector-row” so this works on the ends of the tall stand or the ends of the short stands.
Diagram
Note: I make all of my models in Creo, Printables does not support the file type so I put all of my models in this GitHub Repo.