1 / 3
QaDFC Filament Cleaner for 5x1mm magnets — image 1
1 / 3

QaDFC Filament Cleaner for 5x1mm magnets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Variation of this filament cleaner to use smaller 5x1mm magnets. Also includes tabs for easier opening.

Rating
5 / 5
Likes
5
Downloads
29
Makes
1
Views
332
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to try this print but only had a box of 5x1mm round magnets available. So I scaled the original model down, modified the depth of the magnet recesses and restored the internal diameters of the filament and Bowden tube holes.

They worked nicely, but after making a couple of these and using for a few days I became frustrated with the difficulty of pulling the shell halves apart as the magnets are stubbornly strong and only struggling with fingernails did the job. I had the idea to add a small pull tab on the end of each part, and this extra modification works very well.

The gcode perimeters are generated with Arachne in PrusaSlicer 2.5.0 alpha; I think the result is quicker and cleaner than my previous attempts using 2.4 as there is now no fill needed in the perimeters.

Tags