Apple TV 4K Mount - Wall/TV Stand
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.56 – €5.57 net (excluding VAT)
For file: Apple TV 4K Mount_0.2mm_PETG_MK3S_5h11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.06 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 5.19 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This mount fits Apple TV 4K and newer generations perfectly allowing for secure storage while keeping the unit hidden.
- Rating
- 5 / 5
- Likes
- 224
- Downloads
- 2,738
- Makes
- 12
- Views
- 11,069
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My Apple TV quickly accumulated dust while it was sitting under my TV. I wanted a holder that I could attach to either the wall, VEGA mounting brackets on the back of the TV, or use 3M Command Strips depending on where the TV and Apple TV were located. I originally searched but the options available were either too expensive or did not fit my needs. I decided to make my own; and why not, I had just received my very first i3 MK3S weeks before.
The Apple TV slides into the holder with appropriate clearance, has vents to allow for cooling, and a cable area on the bottom for HDMI, power, or LAN cables.
The original design has a center hole for mounting to a wall or TV stand. A later iteration uses a DIN mount to securely hold the Apple TV.
I print these in PETG and PLA with supports in place and then remove the supports. If you have a MMU2S, other multi-filament device, or a dual extruder machine, you could use dissolvable supports. I didn't find that necessary.