1 / 2
40mm Magnetized Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetized 40mm base using 6x3mm magnets
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 277
- Makes
- 1
- Views
- 889
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Public Domain
Simple 40mm magnetized base for warhammer40k. Allows you to use a 6x3mm magnet underneath to help with transportation of minis. Magnet hole is slightly recessed so the magnet does not sit flush with the bottom allowing for slightly oversized magnets. Hole is pushfit so no superglue should be required.
The base should be able to be printed either orientation, print upside down for a smooth top surface. No supports should be required in either orientation.