1 / 5
Max Films - 3D printed Switch Films for Mx Mechanical Keyboard Switches — image 1
1 / 5

Max Films - 3D printed Switch Films for Mx Mechanical Keyboard Switches

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Switch films similar to deskeys or Tx Films

Rating
5 / 5
Likes
24
Downloads
158
Makes
1
Views
1,688
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Never pay for switch films again.

Prusa Silcer gives a disclaimer that this model is in imperial this is wrong. Click NO on the dialogue box in order to get the correct size.

These films were deigned using the dimensions of deskeys switch films but without the middle part as I find that it doesn't do anything and makes the films harder to install.

To print make sure your slicer is set to 0.15 layer height as the thickness of these films is 0.15mm.

If you want to change the thickness of the films then you can just change it in the slicer. Just remember to unlock the scaling so you don't mess up the rest of the dimensions.

Just set them to fill your build plate and then they should print in around 10 minutes depending on the size of your build plate.

Tags