1 / 2
Simple Cylindrical Sieve
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Cylindrical Sieve - customizable via OpenSCAD
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 83
- Makes
- 0
- Views
- 430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
ATTENTION: This model needs special slicer settings!
Set top and bottom layers to zero.
Set infill to ‘grid’ and play with infill-percent to get the mesh size you wish. Keep in mind to have ‘Only infill where needed’ unticked.
Increase perimeters as desired.
If you want thicker lines for the sieve, you can increase ‘Advanced → extrusion width → infill’.
Use Mesh-Test.stl for a quick print to find the spacing you need.
Pictured sieve has a diameter of 100mm and was printed with 30% infill-setting and a 0.6-nozzle.