1 / 2
Davey Silensor Pool Pump Split Barrel Nut
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A split barrel nut compatible with Davey Silensor Pool Pumps, or other pumps using a 80mm fitting with 6mm pitch threads
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 193
- Makes
- 0
- Views
- 912
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Breaking a fitting on your pool can be a frustrating experience. A typical repair involves cutting the pipe and gluing in a new union and fitting. With a split barrel nut, you can replace the fitting without cutting any pipes.
Print the two parts and then mate them together over the pipe and secure both sides with a ¼" bolt and nut.
Instructions
- Print in PETG or ABS. Do not use PLA as it will degrade and fail and could result in serious water damage!
- 0.4mm Nozzle
- 0.20mm layer height
- 100% Infill
- Supports on build plate
- Print with threads facing up