1 / 2
Ender 3 (and Pro Variant) Grill-less fan shroud for OEM Stock fans — image 1
1 / 2

Ender 3 (and Pro Variant) Grill-less fan shroud for OEM Stock fans

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The stock Creality fans do a good job of moving a decent amount of air, but when any sort of air resistance is…

Rating
0 / 5
Likes
15
Downloads
129
Makes
0
Views
565
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

The stock Creality fans do a good job of moving a decent amount of air, but when any sort of air resistance is introduced, it drastically increases the noise. I'm going to be using my printer inside an enclosure in my garage, but I would like to keep the noise down. I saw this great design, but I wanted to be able to keep my stock fans because they work fine.

I've attached the Fusion 360 design file, a STEP file, an STL and OBJ file.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

Any really

Infill:

20%

Filament: Kodak PETG Black


Notes:

In PrusaSlicer, I used the layer height modifier, so the wall of the part is 100% infill, but where the fan mounts is 20%.

Use supports on build plate only, for the two mounting points that overhang. Print the surround hotend fan mount down.

How I Designed This

I used FreeCAD to open the file and export it as STEP, where it was then imported into Fusion 360. I removed the fillet around the shroud, and then extruded the fan mount inside the duct by 12mm. I then extruded the front face of the shroud by 10mm, to make it 2mm wide, like the rest of the part, and added back the fillet. Around the shroud is a fillet of 1mm and around the fan inlet is 0.5mm

Category: 3D Printer Extruders

Tags