Small 5-hole Ocarina for kids
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 5-hole ocarina that ranges relatively well from C5 to D6. Refer to the chart to see how far it deviates from…
- Rating
- 4.85 / 5
- Likes
- 158
- Downloads
- 1,241
- Makes
- 25
- Views
- 3,207
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
This is a 5-hole ocarina that ranges relatively well from C5 to D6. Refer to the chart to see how far it deviates from the ideal frequency at each note compared to other 3D printed ocarinas.
Its small size is suitable for tiny hands learning music for the first time (though big enough for adults as well!).
As a bonus... here's a place I made to practice and test your ability to name tones by ear:
http://www.eenerd.com/JuliusStuff/Ocarina/story.html
If you make one, please share!
Enjoy!
Here's a very pitiful interpretation of The Magical Flute:
Februrary 1st, 2016 update: Changed out the .stl file with one that wasn't broken into a top and bottom half... should print fine now.
Print Settings
Rafts:
No
Supports:
No
Notes:
No supports necessary, just print as is, where is. I used 10% infill for all of the ones I've ever printed, however you'd probably end up with the sharpest sound if you went 100% (and added acetone vapor treatment). Nonetheless, it plays right off the build plate.
Category: Music