1 / 1
Kobalt Bit Sleeve
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple sleeve to keep bits together
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 20
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This simple sleeve keeps the two bit holders that come with this Kobalt Precision Screwdriver Set together and protects the pocket lining of the bag they usually get chucked into.
The sleeve prints using spiral vase mode with zero bottom layers so both ends are open.
A loose fit allows the bit holders to slide in and out easily while detents on the one end keep the bits from falling out when fully seated.
Print Settings:
- Material: PLA
- Nozzle: 0.4mm
- Layer Height: 0.25mm
- Line Width: 0.5mm <== Important
- Perimeters: 1
- Bottom Layers: 0
- Infill: None
- Supports: None
- Bed Adhesion: Skirt
- Spiral Vase: Enabled (Prusa Slicer setting)
- Spiralize Outer Contour: Enabled (Cura setting)
- Printing Orientation: End-side down