Corner Brackets for Sacrificial Table Tops
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4 of these corner brackets will let you add a sacrificial MDF sheet on to your desk or bench.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Bench Corners for Sacrificial Tops
These corner brackets let you add a sacrificial 12 mm MDF top layer to your desk or bench and keeps it from sliding off the bench. Its suitable for 22mm thick desktops (such as some IKEA desks). Especially useful for light drilling, cutting and saw works.
Screw the corner onto the edge of the desk from below. Then measure your desk and get a piece of 12 MDF cut by a department store or wood supplier near you. Drop the top layer on top of the desk. If you don't need it you can take it off, store it and you'll be able to use the desk for office work.
Print these corners from PETG or any other filament.