Tapered feet raisers with rubber bottoms for Printer Box with 3-piece steel sheet holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tapered feet for Prusa Box stretched to be 35mm in height when combined with rubber pads to accept steel sheet holder
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 288
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This a remix of the nice-looking tapered feet adapter for [PRUSA] Box. When combined with rubber legs [PENN ELCOM 3/4" x 1-1/2" Rubber Feet for Amp/ Case/ Speaker - F1686/20] (https://www.ebay.com/itm/281067833790), the remixed legs are 35mm, which allows to use them with the 3-sheet holder (https://www.printables.com/model/78667-prusa-box-enclosure-expandable-steel-sheet-holder).
In the mix, I have stretched the middle part of the foot to 17mm (file prusa_box_feet_17mm_M5_long_bolts). I then made the mounting bolt holes longer so we can use the 12mm M4 bolts that came with Prusa Box (file prusa_box_feet_17mm_M5). Finally, I have modified the central bolt hex hole to fit M6 / 1/4" bolts that were a better fit for my rubber feet (prusa_box_feet_modded_17mm_m6_2).
Finally, I'm providing prusa_box_feet_sliced, which is simply the original foot adapter sliced into 3 parts. You can stretch the middle part and then stack all 3 parts back together to get any height.