1 / 4
GRX chain guard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A chain guard for Shimano GRX 1x cranks (tested on FC-RX600 1x).
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 134
- Makes
- 1
- Views
- 1,852
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
A chain guard for Shimano GRX 1x cranks (tested on FC-RX600 1x).
The chain guard should be held with 4 zip ties
I recommend printing this model in PETG or ABS, PLA might be too brittle. I printed mine with a 0.6mm wide nozzle and 0.25mm layer heights on my I3MK2.5S. The model requires supports (on the build plate only).