1 / 5
Ikea ANNONS Pot Lid Spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dropped one of our new Ikea pot lids so decided to model up a fix!
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 79
- Makes
- 3
- Views
- 565
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Warning: If you do this please use a heat resistant filament.
We had broke one of our Ikea lid handles so I drew up a replacement in Fusion and printed in Proto Pasta's Carbon Fiber HTPLA. I heat treated for 20 min at 230F
In Prusa I scaled the X and Y to 100.6 and the Z to 99 to account for the shrinkage during annealing.
Please print as shown in my last pic. If you don't want to use additional supports you can use a support modifier like I have done to save some filament. Mine is printed at 0.20mm at 50mm/s
Hope this helps someone else!