Dryer Rack for Freezer/Storage Bags—Abstract Version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Concerned about the impact of plastic on our environment? Re-use your freezer and storage bags!
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 64
- Makes
- 0
- Views
- 617
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Concerned about the impact of plastic on our environment? Re-use your freezer and storage bags!
We like to wash our freezer bags and re-use them. This is a more contemporary (abstract) version of my other model. Not everyone likes the flower theme as much as my wife does…
The stems are modular. Use two parts for a gallon-sized bag, or one part for quart-sized bags.
Version 1.1: Added a chamfer to the stem, to counteract lateral stress (cover photo shows old version). As a result, each unit now needs one “stem” and (at least) one “extender”. Base needed to be increased a bit in diameter.
Print instructions
One unit consists of 1 base, 3 stems, 3 extenders, and 3 caps.
I printed everything with 0.2 mm layer height, 15% cubic infill, no supports, using PETG but I don't think PLA would be a problem. It's not that these bags are dripping wet. I used 3 perimeters for stem and extender.
The stem/extender components come with built-in sacrificial supports, to stabilize them. Just hold the support shield and twist the stem, they come off easily.
When you screw things together, remember these are 3D printed parts, not metal, so use mild force to avoid shearing the male parts of the threads off.
3MF files with suggested settings are included.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.