1 / 8
CR-200b printhead with Direct Drive and Bl Touch — image 1
1 / 8

CR-200b printhead with Direct Drive and Bl Touch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Dragonfly BMS, Bl Touch and an Orbiter 2.0 are installed on the original CR-200B print head

Rating
5 / 5
Likes
26
Downloads
184
Makes
1
Views
1,721
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A Dragonfly BMS, Bl Touch and an Orbiter 2.0 are installed on the original CR-200B print head. To mount the Orbiter 2.0 I designed an adapter that is attached to the print head with 2x M3 screws (DIN 912). Threaded inserts M2 and M3 are used for mounting.

Due to the size of the radial fan (4010), the printable area is limited to X by 10mm and Y by 3mm. For this it is also necessary to move the X limit switch by 13mm.

The CR-200B runs on Klipper and is equipped with a Bigtreetech SKR mini E3 V3 board, a direct drive extruder, and a BLTouch sensor.

I have uploaded the printer.cfg file as a text file, along with my PrusaSlicer settings.