1 / 3
Project Aegis (Blackbeard shield)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Picatinny-mounted shield, dubbed the Blackbeard shield, from the game R6? idk I never actually played
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 62
- Makes
- 0
- Views
- 1,167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- GNU General Public License v3.0
3d model mount is modified from https://www.thingiverse.com/thing:3220747
original template and instructions from https://app.photobucket.com/u/HUNminator/a/821b0631-5570-48bb-853c-b84532688ed2
I'm not the original owner of the template nor the model files, I just compiled them for easy access for whoever wants to make one instead of buying one. Let's see those shields!
things needed:
- 2mm polycarbonate/plexiglass sheet (sizing is up to you, i used A3 size, then fitted it diagonally)
- 1x M3x30mm nut and bolt
- 2x M4 screws
- paper (not a must, but definitely helpful)
- rubber-gasket-bumper-whatever-this-is or similar
(Simplified) Instructions:
- print the template on paper/freehand it on the polycarb sheet lmao
- (size it accordingly)
- cut the shield out from the sheet
- heat and bend it along the vertical lines in the red-lined template
- (I did 300degC on heat gun, but 200 is good and slow)
- (try not to “overcook”, bubbles will appear!)
- print the things, mark holes on the shield to drill, and drill holes
- Use M4 screws to attach shield to mount
- Use M3 nut and bolt for the picatinny clamp
- Rubber-gasket-thing to go around the perimeter of the shield, no ouchies
- mount on blaster, go pew pew, throw the whole blaster away if shield is destroyed
More detailed instructions are in the resources, check them out!