Drum rack headphone hook (multiple versions)

A headphone hook for 1.5" (38.1 mm) drum rack tubing (common size of Roland e-drum racks). You can choose between two designs ("Headphones" labeI in writing or a simple icon). It clamps onto the tubing using two M6 bolts.

UPDATE: Added two differently shaped versions for vertical tubing – smooth (yellow renders) and sharp (green renders). Both in four additional sub-variants according to decoration (label or icon) and thread (insert or tap).

I've got more drum accessories in my profile, be sure to check it if you're interested:
https://www.prusaprinters.org/social/34791-saddamcz

Print instructions

There are two versions differing in the diameter of the bolt holes in the hook part – one variant is prepared for M6 brass threaded inserts (hole ID 8.25 mm) and the other has 5 mm holes that can be tapped to accept M6 screws. In case you need a dimension between the two, you can print the 5-mm-hole variant with a large number of perimeters or a solid infill in the area using local modifiers when slicing and then drill it out to the desired spec. The clamping bracket is the same for both the "insert" and the "tap" variant.

Prints without supports.

If you print it, let me know in a comment how it works for you, please. Thanx!