HSE2 868 BS Case Re-Mix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement case for the Hormann HSE2 868 BS
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 79
- Makes
- 2
- Views
- 647
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I was after a simple case to print for our remotes and originally used the case by @arminth which was great but did not last too well as the sides where the cases overlap were quite thin. I guess we are not very careful and they just get chucked about the cars.
So decided to remix it slightly to have thicker overlap and also to hide the LED behind a couple of layers of filament as this would get dust and dirt in. i also made the case a little more shallow
The top of the case was printed with 2 layers of a lighter colour so the LED would shine through, which also made it a bit more interesting
Layer height of 0.2
Ziro Black PLA for the body.
Ziro Matt Yellow PLA for the top two layers.