Ultimaker Original Powerplug Pusher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If i push the Powerplug of my Ulti a Little bit to the left, he will turn off.... I saw an other Solution for this…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
If i push the Powerplug of my Ulti a Little bit to the left, he will turn off....
I saw an other Solution for this Problem here but with 2 Problems:
1:It was for a straight plug and my one is angeld
2: You are not able to use the USB Plug ! (I have the Original without +)
So my Solution is working fine for me ! As you can see on the Pictures ist small easy to print, Need just 1 screw and you can still acces the usb plug !
I also put a heavy Ring at the bottom of the Printer so it wount shake so hard.
You can srew trough the wall (see Picture)
The screw was 29mm Long and selfcutting
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker Original
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Infill:
60% or more
Category: 3D Printer Accessories