1 / 2
Stackable Mio Rack — image 1
1 / 2

Stackable Mio Rack

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A rack that stores 2x2 mio bottles per level and is stackable

Rating
0 / 5
Likes
18
Downloads
70
Makes
0
Views
592
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

The stack file has poles for stacking and the top does not.

I messed up when designing it initially and did not give headroom for the bottles when stacking the racks so I made the standoff for giving about 10mm extra space. The standoff is not required for the current version but I didn't want to have to reprint the bottom level. The standoff also doubles as some nice little feet for the rack.

Supports should not be required for post holes (I chamfered and made them a little deeper than needed but it bridged just fine on my printer).

Printed at 0.3mm layer height with a 0.6mm nozzle in Overture gray blue PLA.

 

Tags