1 / 3
Gridfinity post-it sticky notes stack container
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A container/holder for a stack of approximately 3 standard (I presume) packs of post-it sticky notes for Gridfinity
- Rating
- 4.98 / 5
- Likes
- 477
- Downloads
- 3,696
- Makes
- 60
- Views
- 9,215
- Reviews
- 51
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- GNU General Public License v2.0
UPDATE: I have now added a version of the model with no magnet holes in the base. This will save you circa 15 minutes of print time a couple of grams of filament. If you don't need magnet holes (As I expect most dont), then the no-magnet-holes version of the STL is the one I recommend you use.
Features:
- Can contain approximately 3 standard packs of post-its
- Gaps arounds sides so that you can easily remove the packs of post-its
- Gaps also save filament and print time
- A bit of wiggle room, for comfort
- Can also receive another 2x2 module on top of its very self