1 / 3
Perfect First Layer Test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
First layer calibration test for any printer.
- Rating
- 5 / 5
- Likes
- 79
- Downloads
- 2,887
- Makes
- 12
- Views
- 5,531
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
This is a first layer calibration test for any printer. It consists of 5 identical tiles.
Recommended print settings
- layer height: 0.2 mm
- fill angle: 0°
- perimeters: 2
- skirt: 0
- first layer speed: 25 mm/s
It should be centered on the bed and stretched as close to the edges as possible (exactly like this in the right picture).
Live adjust Z while printing, if necessary.
Interpreting results
Each square should look the same. Surface of the prints should be smooth and pleasant to the touch (just like the one in the left picture).
The tiles should be very difficult to tear apart.