1 / 2
Smart lock "foot" for Hoppe multipoint latch + Switchbot smartlock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model solves a problem of "how do I make my multipoint latch door smart?" There are not many solutions out there.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 56
- Makes
- 1
- Views
- 1,653
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This “foot” for the switchbot smartlock allows it to be placed in the correct position to turn the mortise deadbolt despite the door hardware making fitting a traditional deadbolt type smartlock difficult. Its basically a square with a missing section to allow for positioning over the raised part of the latch faceplate.
I printed in PLA, flat “top” surface down so no supported needed. 15% infill.
The foot is secured to the door by double-sided foam tape.