Blinds crank holder; Kurbelhalter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Crank holder for crank width of approx. 12.85 mm in diameter. Crank has some resistance when pushed in and is then…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 94
- Makes
- 0
- Views
- 446
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Crank holder for crank width of approx. 12.85 mm in diameter.
Crank has some resistance when pushed in and is then held sufficiently.
Kurbelhalter für Kurbelweite von ca. 12,85 mm Durchmesser.
Kurbel hat etwas Widerstand beim reindrücken und wird dann ausreichend gehalten.
Print Settings
Printer:
Prusa Mini+
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
20%
Filament:
Prusament PLA Prusa PLA
white
Notes:
If the crank is exposed to sunlight for a long time, then PETG should be used instead of PLA.
Wenn die Kurbel längere Zeit Sonnenlicht ausgesetzt ist, dann sollte PETG statt PLA verwendet werden.
Category: Replacement Parts