Lathe Toolpost pen/sharpie holder. BXA or any standard tool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick large sized sharpie/pen holder for lathes. BXA and a style for any tool holder. The screw holes are M8.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 66
- Makes
- 0
- Views
- 722
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This pen/sharpie holder is for a lathe quick change tool post (QCTP) holder. It lets you make a mark on a part in the lathe precisely and easily. This is to help mark & measure parts simply where exact precision is not necessary. One variant is for a BXA sized tool post. I was inspired by another modeler on here - that I can't find anymore - thanks to them. The other is to use in a tool holder - AXA - or whatever you are using - the pen holder is held by a toolholder similar to any lathe tool.
The hole is huge and will hold a big white board marker or anything smaller like a sharpie, or a felt pen, or possibly a pencil. The vertical threaded piece with a washer is a simple nut and washer for a simple height stop. Don't turn hard on the QCTP handle locking in the holder - you will break the holder - just a light touch is all that is needed.
I printed with 3 perimeters, supports, and 15% infill, 0.6mm nozzle with 0.4mm extrusion. Holes are M8. I cleaned out the holes with a M8 tap before the bolts would go in.
Update: pen hole is now teardrop shaped so the pen is better supported.