Tonka Bronco - Rear Accessory Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you're familiar with the "Tonka Summit" FPV mod, then you'll know the rear accessory cage can be hard to come by.…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
If you're familiar with the "Tonka Summit" FPV mod, then you'll know the rear accessory cage can be hard to come by. You can now print your own!
You'll need 5 - 2x10mm bolts to put it together. Files should already be oriented correctly; you'll need a little support material for the cage at the bottom; otherwise should good to go.
Update: 1/24/26 I've updated the design slightly to improve strength; still not tested personally though.
As of 7/25/21 I've not personally printed this to test it out, so consider it a WIP. Feel free to PM me with feedback, happy to make mods.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
Yes
Resolution:
0.2 or 0.3
Infill:
20%
Filament: Sakata 3D PLA/PETG/Nylon White
Category: R/C Vehicles