1 / 3
RATRIG V-core3 SKR proV1.2 cooling 6060 fan — image 1
1 / 3

RATRIG V-core3 SKR proV1.2 cooling 6060 fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modular support and cooling duct for SKR pro V1.2. Designed for a 6060 driver fan

Rating
0 / 5
Likes
2
Downloads
17
Makes
0
Views
280
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Modular mounting design for a BigtreetechSKR pro V1.2 on RatRig V-core3.

Duct for driver cooling to mount a 6060 fan ( mounting holes THD is 70.71mm, or verify from centre to centre 50mm ).

There are 2 different “fan covers” wich You can choose from.

Hardware list:

  • 2 M3x25 cap head screws
  • 6 M3 locknuts
  • 11 M3 nuts
  • 4 M3x18 cap head screws
  • 4 M3x10 countersunk screws (cap heads are fine too)
  • 4 M3x12 countersunk screws (cap heads are fine too)

Printing settings and materials:

All the pieces can be printed in PETG/ASA/ABS.

NO SUPPORTS NEEDED.

In PETG just be mindful of stringing. This can be “sucked in” by the fan and blocking it.

PETG: 

  • Speed=60mm/s
  • Layer height=0.2mm
  • Infill=20-10%
  • Walls=4
  • Top/Bottom=4
  • Cooling fan=15%

ASA:

  • Speed=60mm/S
  • Layer height=0.2mm
  • Infill=20-10%
  • Walls=4
  • Top/Bottom=4
  • NO COOLING FAN

 

Preparation and installation:

  1. Get the “SKR_pro_V1.2_mounting” piece and insert 7 M3 nuts form the bottom. (they should have a tight fit)
  2. Mount the Board itself on the mounting piece “sandwitching” it together witch the electronics panel of the RatRig.
  3. Tight the 4 M3x18 (wich are holding the board and the modular “chassis”) with 4 M3 locknuts.
  4. Get both “Spacer_ducts” and mount them to the “chassis”. The allen key should go trough the top holes.
  5. Insert 2 M3 nuts for each “Spacer” from the bottom and backpull them into place.
  6. Get 2 M3x25 cap head screws, insert them trough two holes of the “Cover_6060_fan” you have chosen and insert them on to the 6060 fan holes. (there are 4 rised section that have to be mounted towards the fan)
  7. Install this sub-assembly on to the “Driver_cooling_duct” securing everything with 2 M3 locknuts.
  8. As the final step mount the assembly on the two spacers using 4 M3x12 Countersunk screws (cap heads are fine too).
  9. ENJOY.

I know that the wire managment is “awesome”.

I'm currently working on the printer. 

 

 

 

Tags