Sodastream bottle dryer
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.96 – €6.07 net (excluding VAT)
For file: Drain v2_0.2mm_PETG_MK3S_5h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.52 excluding VAT (range midpoint).
- Weight reported by the author
- 79 g
- Print time reported by the author
- 5.29 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easy sloped bottle holder that will hold 3 of the 0.5 or 1.0 liter bottles and let them dry.
- Rating
- 4.5 / 5
- Likes
- 8
- Downloads
- 70
- Makes
- 2
- Views
- 802
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Was looking for a good bottle holder that would drain towards the sink. Most were either too elaborate or didn't drain away. This one is to the point and works great.
v2 - Wider, longer, taller, edges lifted to keep it from draining in the wrong direction. Hollow tubes to allow better breathing and circulation.