1 / 2
HP hard drive mounting grommet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grommets commonly used to mount hard drives in HP desktops.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 186
- Makes
- 1
- Views
- 790
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
This is a model of hard drive mounting grommet commonly used in many HP desktops, both Elitedesks and Prodesks.
Why buy them when you can print them!
Printing Instructions:
- Print 4x grommets for each hard drive
- 0.2 layer height
- 20% infill
- PLA or PETG
Installation Instructions:
- Attach grommet to hard drive using 4x M3x6mm screws
- Mount hard drive into HP chassis
Here are the dimensions if you want to create your own:
- Base outer diameter: 12mm
- Base inner diameter(open): 3.3mm
- Base height: 2.6mm from z=0
- Upper outer diameter: 8mm
- Upper inner diameter (open): 6mm
- Upper height: 5mm from z=0