1 / 3
Nimbus Ship (Toy Stand)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Nimbus Ship + Plume is a toy / figurine stand. Comfortably fits a toy that is 30mm x 30mm x 40mm.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 38
- Makes
- 1
- Views
- 306
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Nimbus Ship + Plume is a toy / figurine stand. Comfortably fits a toy that is 30mm x 30mm x 40mm.
Nimbus Ship Slicing Notes (FDM)
You may need internal support structures in the central cavity so it can print the “roof”. You can probably get away without printing any supports in the bottom section due to print-friendly angles. It's tall so make sure you have that great bed adhesion!
Nimbus Plume Slicing Notes (FDM)
I recommend a little extra wall thickness or infill density since the part needs to hold up the Nimbus Ship. I recommend pulling the z-seam to the back.