1 / 11
Sharpy - (Bench)Marker Cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Why print a Benchy when you can print a Sharpie Cap!?
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 43
- Makes
- 0
- Views
- 519
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
30 minute print designed with challenging geometrical features for 3D printers. No supports.
Includes usable Sharpie pen cap!
Includes many tests that come with Benchy, including:
- Symmetry
- Almost… excluding the clip
- Planar Horizontal Faces
- Top surface of the clip
- Tiny Surface Details
- For high-resolution 3D printers
- Letters on the outside of the clip are less than 2mm tall and have a thickness of 0.1mm
- Letters on the inside of the clip extend out .2mm
- Overhang Surfaces
- Pen tip insert (inside)
- Low-Slope-Surfaces
- Curved Top of the pen cap
- Large Horizontal Holes
- Pen Insert
- Small Horizontal Holes
- Pen tip insert (inside)
- First-Layer-Details
- Shallow letters on the bottom
Additionally including:
- Planar Vertical Faces
- Bottom half of the cap and clip sides
- First layer adhesion test
- Ring clip has small surface area, will detach with poor adhesion
- Stringing testing
- Ring clip makes extruder jumps
- Smooth overhanging 45 degree surface
- Reveals surface deviations
- Close proximity printing
- Ring clip and cap are intersecting print in place