CALCIFER SUN CATCHER
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My daughter is into her Anime, I've been working on sun catchers of late. So ... here's Calcifer.
- Rating
- 0 / 5
- Likes
- 68
- Downloads
- 182
- Makes
- 0
- Views
- 2,308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My daughter is into her Anime, I've been working on sun catchers of late. So ... here's Calcifer.
This is a sun catcher printed without fancy multi-material mechanisms.
The frame acts like the lead in a stained glass window. It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.
Once completed, the coloured pieces are then glued into the relevant "gaps" in the frame. I used PVA glue and allowed it to set over a number of days.
The tolerances are really tight, so you may need to sand the parts down a little to make them fit depending on your printers tolerances.
Print instructions
Category: 2D Art Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.1mm
Filament: N/A PLA / PET
Notes:
It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.
Smaller parts may need a brim.
Care must be taken when removing from the print bed as they are between 0.5mm and 1.0mm thick.