1 / 2
Ender 3 Cable Guide for Direct drive - Underplate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
When i printed this:
https://www.printables.com/it/model/132876-ender-3-v2pro-cr-cable-guide-for-direct-drive
i found out that the screws don't grasp onto anything and as such the cable guide flings around when the print head moves. So i decided to make this underplate which clamps onto the extruder mount to keep the cable guide still.
When assembling, if the screw holes printed too small, take the third allen wrench supplied with your printer (from smallest to biggest) and ream the holes.
Assembly instructions:
- Screw the upper right screw in together with the cable guide. The underside must swivel left and right
- Align the other two holes with the cable guide and extruder mount's ones and screw in the other two screws.