BNCtoSCART Adapter Shell (for use with RetroTINK-5X Pro)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.04 – €7.39 net (excluding VAT)
For file: BNCtoSCART Shell Full - Rev3_0.2mm_PLA_MK3S_7h18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.71 excluding VAT (range midpoint).
- Weight reported by the author
- 72 g
- Print time reported by the author
- 7.29 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The BNCtoSCART Adapter allows for easy connection of RGBs over BNC plus stereo audio.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 587
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
Typical use case would be with a Extron Crosspoint or daisy-chain from the output of a PVM, TTL sync only. Connections are turned 90° so they are facing backwards, creating a simple and clean cable management path in your entertainment system.
This 3D printed shell houses and protects the adapter for a snug and sturdy fit.
Parts:
- (2) of M3x6 screws
- (2) of M3x10 screws
- RetroTINK-5X Pro: https://www.retrotink.com/product-page/5x-pro
- BNCtoSCART Adapter: https://kytor.com/store/product/bnctoscart/
Revision History:
- Rev 1 - Initial Release
- Rev 2 - Modified bottom shell for low profile BNC jacks
- Rev 3 - New internal geometry to print with minimal supports.