UM2 Extrusion Upgrade Kit Mount for Ultimaker Original Plus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount is used to put the feeder from the Ultimaker Extrusion Upgrade kit on the Ultimaker Original Plus.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is the latest revision of my mount to be able to upgrade a UMO+ with the UM2 Drivetrain Extrusion upgrade kit to be able to get the same feeder and printhead as the latest and greatest UM2+
Guide on how to do this process can be found here:
https://community.ultimaker.com/topic/14065-assembly-manual-um2-upgrade-kit-on-ultimaker-original-plus/
Prints without support on the top edge, or lying down with support.
The long slot is for cable management, you put the whole bundle in there and fasten it with three zip ties
It should even be possible to use this to upgrade a non-plus UMO if you also get a PT100 amplifier board.
What you need:
- Ultimaker Original Plus (not original since the UM2+ head uses a PT100 sensor)
- Ultimaker UM2 Extrusion Drivetrain Upgrade Kit
- 3 Zip ties
Originally posted on YouMagine back in 2016