Splice Clamp for Model Making
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.94 – €8.49 net (excluding VAT)
For file: Splice_Clamp_0.2mm_PLA_MK3S_7h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.72 excluding VAT (range midpoint).
- Weight reported by the author
- 94 g
- Print time reported by the author
- 7.84 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This Splice Clamp for model making is an excellent solution for end-to-end gluing and assembly of parts.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 59
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This End Splice Clamp is an excellent solution for end-to-end gluing and assembly of parts. An opening in the clamp allows you to glue to parts together while they're clamped in place, guaranteeing they won't move before the glue sets.
Overall length: 150mm. Overall width: 75mm. Clamping surface: 85mm long x 20mm wide in two places. I used M4 bolts and brass inserts. I recycled a mouse pad for the non-slip surface on the clamp. The nuts on the longer bolts at the back of the clamp are used to keep the two surfaces parallel.
I am using knobs from Nils Kal:
https://www.printables.com/model/21935-metric-clamping-knobs-m4-m5-m6-m8/files