Netatmo Anemometer Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Netatmo Anemometer Bracket Here's a bracket to mount the Netatmo Anemometer on a pole. The bracket is split in two,…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 52
- Makes
- 0
- Views
- 836
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Netatmo Anemometer Bracket
Here's a bracket to mount the Netatmo Anemometer on a pole. The bracket is split in two, left and right and there is an STL file here for each one. Two pole sizes are provided 20m and 25mm.
The fixings needed are:
4 x 30mm M3 Stainless Steel Hex Cap bolts
6 x 20mm M3 Stainless Steel Hex Cap bolts
6 M3 Stainless Steel Nyloc Nuts
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament: PETG PETG Black
Notes:
The fixings needed are:
4 x 30mm M3 Stainless Steel Hex Cap bolts
6 x 20mm M3 Stainless Steel Hex Cap bolts
6 M3 Stainless Steel Nyloc Nuts
Category: Outdoor & Garden