Shelly 1PM PLUS case - no insert
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.08 – €2.54 net (excluding VAT)
For file: shelly_plus_1pm_wago_remix_screws_0.6n_0.3mm_PETG_MK3S_1h59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.31 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 1.99 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A remix from the thingiverse version with WAGO. Uses screw instead of bolt & inserts.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 321
- Makes
- 2
- Views
- 2,589
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
⚒ No 3D printer? No time to source components?
I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙.
📦 Shipping across the EU: 👉 Get it at NautilusForge.shop
Remix of this holder: https://www.thingiverse.com/thing:4974328
In complement to @cnrd I remixed the version with WAGO from thingiverse
Uses screws with diam slightly superior at 3mm instead of inserts from original model,
No support, Prefer PETG
Text from Thingiverse original model, I remixed:
“
Shelly 1PM PLUS case for "on cable" wiring (similar to shelly button).
The other relays in the PLUS line are supposed to have the same external dimensions, so theoretically they should all fit, but this model was made specifically from the 1PM PLUS dimensions (which, btw, are considerably larger than the official specifications, by more than 1mm on all sides).
The Shelly 1PM PLUS relay version features additional N and L terminals compared to the old 1PM, so you shouldn't need an extra connector anymore, hence the version without wago connectors.
Features:
A version with room for 2 WAGO 221-413 connectors
cutouts on both sides for better ventilation and you can easily see the whole diagram on the shelly upper side, and also access to the button and connectors on the other side.
side cutouts and gaps above and below the long relay side, for better ventilation (see section image)
the cable holes are for 8mm cables, and there are slots designed to hold the cables in place with zip-ties
recommended filament: ApolloX modified ASA based 3D printer filament, high strength and heat resistant
"