1 / 1
Carabiner Size S
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Carabiner needs no supports and is self locking There is a size M and L as well -Updated 07/23-
- Rating
- 4.5 / 5
- Likes
- 118
- Downloads
- 802
- Makes
- 13
- Views
- 2,494
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Hey there :)
This Carabiner is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without requiring supports when printed.
It is perfect for keychanes or to hang light to medium loades.
-DO NOT USE FOR CLIMBING-
Step 1: Load the files into the slicer (Or use the gcode)
Step 2: Correct the orientation of the model:
- The CARA-02 must lay flat on the printsurfice (Which side of the two is up to you:)
Step 3: Slice
- No supports
- 0.2mm Layerhight (0.4mm nozzle)
- 15 - 50% Infill (Gyroid)
- PETG preferred
Step 4: Use
- Try to press the hook inwards (Use a little pressure, the layers tend to join)
Happy end
Check out the Large Version!