Taito Vewlix Control Panel Support / Display Brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support brackets for working on or displaying a Vewlix control panel
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 63
- Makes
- 0
- Views
- 780
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Support / display brackets for working on or displaying a Vewlix control panel.
If working on the rear of the panel then slide it into the throat of each bracket. If desired, M4 nuts can be used to clamp the panel to the bracket but it's sturdy with out them.
To use the brackets to display a panel simply insert the M4 panel bolts into the 4.5mm holes in the brackets.
13.5 x 13.5 x 1mm deep recesses on the bottom for (optional) rubber feet. The ones I'm using are 12.8mm x 12.8mm x 3mm.
Mesh sides are for aesthetics only. No glue required, should be a friction fit.
Printed in PLA at 0.25mm layer height & 15% infill.