Star Wars Frigate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Star Wars Frigate inspired by the High Republic Longbeam
- Rating
- 5 / 5
- Likes
- 122
- Downloads
- 382
- Makes
- 0
- Views
- 2,496
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
This is my own design. It is heavily inspired by the High Republic Longbeam, with elements from sailing frigates (i.e. fore-, main- and mizzenmast, cannons, bowsprit).
I imagine this ship to be about twice as long as a Longbeam. Assuming the Longbeam to be 50m long, this ship would be 117m long, 56m wide and 18m tall.
This ship carries 16 cannons and 20 thrusters. The thrusters on the wings are rotated 5° up or down so that they don't fry the wings behind them.
The model comes in 1:270, 1:1000 and 1:2000 scale.
At 1:270 scale, the thrusters on the wings and the turrets are moveable. The landing gear can also be extended or retracted depending on which way around it is inserted.
| scale | length | width | height |
|---|---|---|---|
| 1:270 | 435mm | 207mm | 68mm |
| 1:1000 | 117mm | 56mm | 18mm |
| 1:2000 | 59mm | 28mm | 9mm |
Print Instructions
1:270
Everything can be printed at 0.2mm layer height and requires support on buildplate.
| Part | Copies |
|---|---|
| frigate_bow | 1 |
| frigate_middle | 1 |
| frigate_stern | 1 |
| frigate_wing_outer | 4 |
| frigate_wing_inner | 4 |
| frigate_stern_wing | 2 |
| frigate_engine | 8 |
| frigate_stern_engine | 2 |
| frigate_bow_landing_gear | 1 |
| frigate_stern_landing_gear | 1 |
| frigate_turret | 16 |
1:1000
Printed at 0.15mm layer height. Requires support on buildplate. 2 layer raft recommended.
1:2000
Printed at 0.1mm layer height. Requires support on buildplate. 2 layer raft recommended.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#